This is going to sound weird, but I’m just going to come out and say it; one of my favorite renovation projects so far was the powder room in our Charleston house. Really? A bathroom? And not even like a master bathroom with a waterfall shower and a huge tub? Yeah, really, just a powder room. And I can sum up why in one word: “shiplap.”

Actually it’s really two words: “Nickel Gap”. So what’s the difference, and why does it matter? Well, technically shiplap is a type of board with a rabbet joint which allows the boards to overlap. The bathroom above did not use real shiplap, but it essentially looks like it. Instead we used a method called “Nickel Gap” which is simply spacing the boards the width of a nickel. This method is more time consuming, but can be done for significantly cheaper and yields a similar result.

For the boards, we used 5mm plywood, which is about as thin as plywood comes. At about $13.50 for a 4’x8′ sheet, you can really make a room interesting for cheap.  We bought 5 sheets at Lowes and had them cut in-store to 6″ wide strips lengthwise. I think the guy who did the cutting probably still breaks out into a cold sweat when he hears “Customer assistance needed in the board cutting area… bing bong… board cutting area.” I don’t know if they have rules about a number of cuts they’ll make per board, but he did seven cuts for us. He cut all five of the boards stacked, which definitely saved time, though. I could have cut the strips with my table saw, but I never would have been able to cut them as straight and even as in the store.

Read More